Tubesheets are one of the most important components of Shell and Tube Heat Exchangers. These parts are usually made from a round flat piece of forged materials which are machined with holes drilled for the tube ends in a precise location and pattern relative to one another. Tube holes can be drilled and reamed and can be machined with one or more grooves that greatly increases the strength of the tube joint. Fabrication Our workshops have been equipped with modern machineries including CNC drilling machines in order to make any kind of tube sheets. These parts are widely used for fabrication of heat exchangers in any configuration. All machining activities such as lathe machining, drilling, reaming, taping, grooving, and surface milling can be carried out exactly according to client's drawings and specifications. As all of drilling activities is programmed computer and done by state of art CNC machineries, there would not be any possible mistake caused by human.

Size and Shape 
Any size and shape of tube sheet used to make a TEMA or even non-TEMA type can be provided. Our drilling facilities which are equipped with deep drilling mechanism are able to drill very thick plates straightly without deviation from acceptable tolerances.

Material 
The strict use of high quality raw material is guaranteed and proved by raw material certificate with each delivery. Material range is varied from ordinary carbon steel to alloy steel, all grades of Stainless Steel, non-ferrous (Brass, Al-Brass, Copper Nickel) and wide range of Clad Steel consisting of corrosion resistant materials.
 
ASME Material Specification 
Carbon Steel: ASTM/ASME A105, A350 LF1, LF2, A266, A694, A765 Gr2
Alloy Steel : ASTM/ASME SA182 F1, F5, F9, F11, F12, F22, F51, A350- LF3
Stainless Steel: ASTM/ASME SA182 F304, 304L, F316, 316L, F310, F317L, F321, F347
Duplex Stainless Steel : ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
 
Non Ferrous: ASTM / ASME B169, B171, SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 ), SB 160 UNS 2201 (NICKEL 201 ),SB 472 UNS 8020 ( ALLOY 20 ) SB 61 UNS C 92200, SB 62 UNS C 83600, SB 151 UNS 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30), SB 152 UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200.
 
Titanium: ASTME/ASME SB381 GR1 GR2 GR5 GR7 GR9 GR11